AC CLAMP ADAPTOR • Model 8006 is designed to measure AC current up to1500A. • It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.
AC CLAMP ADAPTOR • Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
AC CLAMP ADAPTOR Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.
AC/DC CLAMP ADAPTOR • Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution.
Multi-Trans How to Use Clamp your instrument around the pick-up coil of the multi-tran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured.
MODEL Descriptions Remark Alternative 1007 Digital Multimeter 1009 1008 Digital Multimeter 1009 1010 Solar Pocket Tester Solar battery No 1015 Digital Multimeter 1018 1017 Digital Multimeter 1018 1020 Digital Multimeter Automatic mode switchingbetween AC and DC voltage measurements. No 1103 Analogue Multimeter 1110 1104 Analogue Multimeter with 1000V range and10A range 1109S 1106 Analogue Multimeter 1110 1108 Analogue Multimeter 1109S 1109 Analogue Multimeter 1109S 1601 Analogue Multimeter No 1700 Voltage Tester KT 170 1710 Voltage Tester KT 171 2002 Digital Clamp Meter 2002PA,2002R 2009A AC/DC Digital Clamp Meter 2009R 2037 AC/DC Digital Clamp Meter 2046R 2103 Analogue Clamp Meter No 2401 Analogue Leakage Clamp Meter Equivalent battery type: P625U No 2411 Analogue Leakage Clamp Meter Equivalent battery type: P625U No 2417 Leakage Clamp Meter No 2904 Analogue Clamp...
Kyoritsu 2012R Innovative Multhimeters with current measurements up to 120A AC/DC • Unique Open Jaw technology for AC/DC current measurements • Very compact and as reliable as a tradictional full size multimeter
Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR. • 3400 counts with bargraph display. • Pocket size and heavy duty design.