By Brands
Brands
Sub Categories
Test Voltage : 2kV 50-60Hz ● AC Ampere Over Load Scale:200%, 300%, 500% ● Composition:Glass Window, ABS resin frame and case, Bakelite base ● Color:Black case and frame, white scale plate and meter body ● Pointer:Stick shape in black color ● Pointer Length:55mm.
● Triangular-shaped design keeps the sections aligned during extension and retraction.● Push button release for stick extension and retraction. ● Telescopic design allows for easy assembly, storage and transportation.● Withstands voltage rating of 100kV from 30cm for 5 minutes. ● Universal end fitting accepts a wide variety of standard attachments.● Highly visible yellow tip section.● Easy-to-replace sections.● Carrying bag included. ● Optional integrated height measurement scale.● Complies with IEC 62193 safety standard.
This demonstrative panel is intended to demonstrate the use Multifunction testers and specific instruments like Continuity, Insulation, Earth, Loop and RCD testers of Kyoritsu. The panel simulates an electrical installation with TT and TN distribution systems, easy selectable by a switch on the panel. The tests that can be carried out are: • Continuity Test of Protective and Equipotential conductors • Insulation Resistance Test • Earth Resistance Test (Volt-Ampere method) • Earth Loop Test, including Prospective Short circuit Current (PSC) and Prospective Fault Current (PFC) • RCD Tripping Test
Calibration Gas Generator CGS-12 Calibrator for SO2/NOX/CO analyzers Built-in zero gas generator enables suction of ambient air & purification into zero gas Concentration of span gas (calibration) is freely adjustable between 1:100 & 1:10000 of component gas concentration
FEATURES ● High contrast OLED display● Designed for viewing in the dark, for mining industry.● Wide viewing angle.● Smart microprocessor-controlled.● 2 x 16 characters, large, High Contrast, Intelligent OLED Display.● Automatically calculates Delectric Absorbtion Ration (DAR).● Automatically calculates Polarization Index (PI).● Insulation resistance; Auto-ranging on all ranges.● Ener-Save● Bar graph indicates test voltage. Rise and decay can be obeserved.● External voltage presence warning (>500Vac or Vdc)● Overload protection● Low battery indicator (real time battery voltage mearsurement)● Measures insulation time duration of the test● Better than 10% accuracy on all ranges● Auto-off SPECIFICATIONS Test voltage From 500Vdc to 10kVdc Adjustable in 500V Steps Preset buttons 1kV, 2.5kV, 5kV, 10kV Measuring range 800kΩ-500GΩ (auto-ranging) Accuracy ±5% ± 2 digits Output power limit 1W Voltage regulation Selected Voltage +20%-5% of nominal value unless current limited. Meaning that if output current is too high, the voltage will...
Fluoride Ion Monitor FMS-4 Simple measurement with just an ion electrode Enables continuous fluoride ion measurement of discharged industrial wastewater By adding ionic strength adjustment solution part of nonionic fluoride is measurable Automatic cleaning and calibration function ensures stable measurement Easy-to-use touch panel Meas. range 0.1 - 10/0.2 - 20/1 - 100/10 - 1000 mg/L
Current Range: 0.1 to 100A DC or 0.1 to 70A AC Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading Output Signal: 10A range: 100mV/A | 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 1.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Dual LCD display. Dew Point Reading. Wet bulb Reading. MAX/MIN with Time Stamp. Data Hold function. ℃ & ℉ Switchable. DATA memory and read function (99 readings from LCD display) Auto Power Off.