Sub Categories
EY200 is an earth resistance tester for testing power distribution lines, in-house wiring system, electrical appliances etc. It also has an earth voltage range for earth voltage measurement.
Frequency bandwidth: DC to 50 MHz Maximum continuous voltage input: 7,000 Volts Attenuation ratios: 1000:1 or 100:1 Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
The 701927 is a 50:1 or 500:1 high voltage (1400V peak) probe with extended bandwidth covering DC to 150MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs (1 MΩ Input Impedance). This probe works with DLM2000, DLM4000, DL6000, DLM6000, DL9000 and SB5000. This probe is conveniently powered by the Yokogawa Probe Interface I/F.
Frequency bandwidth: DC to 15 MHz Maximum continuous input range: 1000 Volts Attentuation Rations: 100:1 or 10:1 Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
Frequency bandwidth: DC to 100 MHz Maximum continuous input range: 1400 Volts Attenuation Ratios: 100:1 or 1000:1 Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
When using different types of probes, such as a voltage probe and a current probe, a small propagation delay difference exists between the probe pair. Small, but significant, this difference is caused by each probe's unique internal circuitry and cable length. This propagation delay difference is known as ‘skew' and creates an error when calculating switching loss or measuring timing. In the high speed switching of the switching power supply, the engineer is required to measure the timing of the control signal in nano seconds. The 701936 Deskew correction signal source provides time synchronized current and voltage sources, which are necessary to calibrate and remove the skew characteristics from your oscilloscope-based power analysis measurements.
Deluxe instrument cart570 mm (W) x 580 mm (D) x 839 mm (H)/A option: keyboard, mouse table/B option: comes with a 3-prong power strip
Models 278610 and 278620 six-dial decade resistance boxes allow quick and easy setting of a wide range of resistance. These resistance boxes are used in combination with voltage or current standards to adjust voltage or current, as dummy load resistances or as an arm of AC bridges.