Check the color difference between two samples. Color difference displayed Δ(L*,a*,b*) Δ(E*ab,C*ab, H*ab) Δ(Y, x, y) Δ(X, Y, Z) or Δ(Rs, Gs, Bs) Color space displayed (L*, a*, b*) (L*, C*ab, hab) (Y, x, y) (X, Y, Z) or (Rs, Gs, Bs) Maximum, Minimum and Average function. Tolerance function. Auto memory (99 sets) & Read function. RS232 interface.
4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Auto ranging from 0.05 to 7000 lumens. Accurate and Instant response. Data Hold function. Data memory and read function. Zero function. Ratio function. Sort function. Comparator function. Best for measuring : LEDs, Small lamps, Fiber illuminators. Auto power off function. RS232 Interface. Easy to use. Adapters kit : 2/3/4/5/8/10m/m
Best resolution 1μΩ. Accuracy 0.05% 5A (120 mΩ) max. test current. Manual or Auto Range. (There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.) Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement) Programmable Hi-Lo alarm with memory of 20 data. Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for Hi and Lo. Readings Hold function. Cable length measurement. The length unit can be selected between Meter (M) and Feet (FT). Resistance measurement results excluding cable resistances. Memory of 3,000 measurement data. Large LCD (5-digit) with backlight (users can choose to disable it). Rechargeable batteries and AC adaptor. Low battery (voltage) alarm. Low power consumption. Communicate with PC via RS232C (to USB bridge) cable. Application: various low-resistance (cables) measurement; contact resistance measurement, …etc.
Wide spectral range. Excellent long term stability. Cosine corrected. Automatic transmission measurements. Select either power or transmission. Solar energy power or transmission. Current time setting function. User calibration factor setting function. End-mount light sensor. Select either W/m2 or Btu / (ft2*h) units Data Hold / MAX / AVG modes. Data Memory and Read function. (99 sets.) Auto Data memory (TES-1333) RS232 interface to PC. (TES-1333R)
4 digit LCD reading. Wide spectral range. Excellent long term stability. Cosine corrected. Automatic transmission measurements. Select either power or transmission. Solar energy measurement. Current time setting function. User calibration factor setting function. End-mount light sensor. Select either W/m2 or Btu / (ft2 x h) units. Data hold/MAX/MIN/AVG modes. Auto Data Memory function. (microSD CARD 2GB) Manual Data Memory and Read function. (99 sets) Auto power off function. USB interface.
Portable Field Printing for Certificate Text and Graphics Two Selectable Fonts (5*7 and 8*16) Programmable text Header and Footer Battery and AC Power Adaptor RS-232C Interface (Optional RS-232C to USB Bridge) Fixed Interval Continuous Printing(5, 30, 60, 300 seconds)
Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W, KW, MW) with Programmable Period Harmonics Analysis ( V and I ) to the 50th Order Display of 25 Harmonics in One Screen with Waveform Display of waveform with Peak Values (512 Samples / Period), Datalogging of 32, 64, 128 or 256 Points/Cycles Analysis of Total Harmonics Distortion ( % THD-F ) Graphic Phasor Diagram Programmable PT (1 to 3000) Ratios Capture 128 Transient Events ( Time + Cycles + Faults ) with Programmable Threshold(%), Can Also be Reviewed in LCD 50000 Records with Programmable Interval ( 1 to 6000 seconds) Output of Waveform, Power Parameters and 50 Harmonics at Command. Large Dot Matrix LCD Display with Backlight Optical Isolated RS-232C Interface Smart Datalogging to save Battery Power for Long-term Monitoring Built - in Calendar Clock for Data Logging